The Milwaukee fibreglass hammer weighing 200 grams is designed to provide a good balance between weight and control. Its low weight makes it suitable for precision work where accurate and controlled strikes are required.

The handle is made of fibreglass, which contributes to a solid construction and reduces vibrations during use. The ergonomic grip provides a comfortable feel in the hand and reduces fatigue during longer periods of work.

The hammer head is designed to deliver effective striking power relative to its size, making it practical for lighter assembly and adjustment tasks. The simple and robust design makes it suitable for both workshop and home use.

The BATO Hammer Set Fibreglass 5 Pieces contains five different hammers that cover a wide range of tasks. The set consists of bench hammers of 300, 500, 1000 and 1500 grams as well as a mallet of 1500 grams.

Each hammer is equipped with a fibreglass handle that combines low weight with high strength and reduces vibrations during use. This makes the set suitable for both precision work and heavier tasks where more striking power is required.

The set is practical for users who want a complete selection of hammers in different sizes, made of robust materials that can withstand daily use in the workshop or on the construction site.

The Halder Bonus Box set "Maintenance" contains two specialised hammers designed for work with metal and sheet. The set combines the models SUPERCRAFT 3366.040 and BASEPLEX 3968.030, both known for their precision and ergonomic design.

The SUPERCRAFT 3366.040 is a non-rebound hammer with a hickory handle and striking faces made of special nylon. It delivers powerful, noise-dampened blows and reduces strain on the wrist and joints. The handle is vibration-dampening, lacquered, and equipped with a protective sleeve that acts as overstrike protection.

The BASEPLEX 3968.030 is a hammer with combined striking inserts in cellulose acetate (red, hard, and oil/fat resistant) and nylon (white, durable). The hammer head is made of die-cast zinc and has integrated overstrike protection as well as a technical holder for the inserts. It has an ergonomic, lacquered wooden handle, and both inserts and handle can be replaced.

The set is suitable for maintenance tasks where controlled strikes are required without damaging the workpiece, and where the user wants a tool with long service life and replaceable parts.

The Ice Bear Japanese Hakkaku-Genno Hammer at 225 grams is a classic Japanese hammer that differs from Western models with its simple yet well-balanced design. It is developed for versatile use, from nailing to working with chisels.

The hammer head has two different striking faces: one is flat and used for driving nails or striking chisels, while the other is slightly curved and suitable for the finishing strike where you want to avoid marks in the material.

The Japanese Genno type is known for its precision and control, making it suitable for both fine woodworking and general craftsmanship. The combination of low weight and compact form provides a good balance between power and feel during use.

The Hultafors Urethane Hammer DB 1200 is designed to deliver controlled and recoil-free strikes. The hammer head is coated with urethane, making it gentle on the workpiece and reducing the risk of marks or damage to the surface.

Inside the hammer head are steel balls that move during impact and absorb part of the energy. This dampens the shocks and reduces recoil, providing better control and less strain for the user.

The head is also spark-free when in contact with metal, making the hammer suitable for work in environments where spark formation must be avoided. The handle is made of fibreglass and has a Santoprene grip that provides a secure and comfortable hold during use.

With a striking diameter of 50 mm, a handle length of 282 mm, and a weight of 1160 g, the DB 1200 is a well-balanced hammer suitable for both assembly and maintenance tasks.

The Teng Tools HMDH60PU is a recoil-free hammer with a head coated in polyurethane. The construction contains steel balls that move upon impact and absorb part of the energy, significantly reducing rebound.

The soft coating makes the hammer gentle on surfaces and workpieces, which is an advantage when working with materials that must not be damaged. At the same time, the closed construction prevents the metal from coming into direct contact with the workpiece, eliminating the risk of sparks.

The hammer has a diameter of 60 mm and a weight of 1270 grams, providing a good balance between power and control. It is suitable for both workshop use and assembly tasks where precision and safety are important.

The Milwaukee Stiletto Hammer TI14SC-H18 is designed with a focus on efficiency and user-friendliness. The hammer has a traditional hickory wood handle, known for its strength and natural shock absorption. This makes it suitable for prolonged use without unnecessarily straining the hand and arm.

The strongly curved axe handle follows the movement of the hand and provides an ergonomic grip that increases precision with repeated strikes. The smooth hammer face is ideal for precision work where a clean and even result is desired.

A built-in magnetic nail starter makes it possible to place the nail with one hand, which is practical when working in confined spaces or when you need to hold the workpiece with the other hand.

The hammer head is made of steel, ensuring high impact strength and long service life. The combination of a metal head and hickory wooden handle provides a tool that balances power and control effectively.

The Halder SIMPLEX soft-face hammer in the Ø 80 mm version combines two different striking faces – a black rubber insert with a 'Stand-Up' function and a white superplastic insert. The combination allows for both shock-absorbing and powerful blows depending on the task.

The rubber insert with 'Stand-Up' makes it possible to place the hammer upright, which reduces the need to bend down and thus promotes a more ergonomic working posture. The superplastic insert is made of a homogeneous, extruded material that provides high wear resistance and long service life.

The hammer’s housing is made of cast iron with integrated handle protection, which increases fracture strength. The wooden handle is ergonomically shaped, vibration-damping and lacquered in the grip area to resist dirt and wear.

As part of the SIMPLEX series, all components are replaceable, making it possible to replace or retrofit parts as needed. This contributes to longer product life and reduced resource consumption.

The hammer is suitable for tasks such as paving, gardening, kerb installation, scaffolding work, carpentry and similar applications where controlled blows and robustness are required.

The Ice Bear Japanese Hakkaku-Genno Hammer weighing 375 grams is a classic Japanese hand hammer that differs from Western models with its compact design and balanced weight distribution. It is developed for precision work where control and feel are crucial.

The hammer has two different striking surfaces: one is flat and used for driving nails or working with chisels, while the other is slightly rounded and suitable for the finishing strike that provides a smooth result without damaging the surface.

The Japanese Genno type is known for its versatility and is used by carpenters, joiners, and craftsmen who want a tool with high precision. The Hakkaku designation refers to the hammer head’s octagonal shape, which provides a secure grip and good balance during use.

The Milwaukee fibreglass hammer 500g is a compact and well-balanced hammer that combines strength and ease of use. It is equipped with a fibreglass handle that reduces vibrations and provides a firm grip, even with repeated use.

The hammer head weighs 500 grams, making it suitable for precision work and lighter carpentry tasks, where control and balance are more important than pure striking power.

The design is simple and functional, and the choice of materials ensures a good combination of low weight and high durability. It is suitable for both professional craftsmen and private users who want a reliable tool for daily use.

The Milwaukee fibreglass hammer 300g is designed to provide a good balance between weight, strength, and comfort. With a 300-gram head, it is suitable for lighter nailing and assembly tasks, where precision and control are more important than raw striking power.

The handle is made of fibreglass, which reduces weight while also dampening vibrations during use. The ergonomic grip ensures a firm and comfortable hold, even during extended periods of work.

The hammer’s construction makes it suitable for both professional craftsmen and private users who want a solid and reliable tool for common tasks in the workshop or at home.

The Milwaukee hammer with an 800-gram hickory wooden handle is an engineer’s hammer designed for precision work and general tasks where controlled strikes are required. It combines a solid hammer head with an ergonomically shaped hickory handle, providing a natural grip and effective shock absorption.

The classic design and distinctive red colour make the hammer easily recognisable as part of Milwaukee’s tool range. The wooden handle contributes to a good balance between weight and control, making it suitable for both professional craftsmen and DIY users.

The hammer is manufactured with a focus on durability and functionality, and it can be used for a wide range of tasks in construction, assembly, and repair.